 printable version
Check the level of hydraulic brakes
A warning  At work do not let the brake fluid in the eye. Avoid getting fluid on painted surfaces, store the liquid in a sealed container.
| PERFORMANCE ORDER | | 1. The main brake cylinder and a tank mounted on a servo inside the engine compartment. On nutrient master cylinder reservoir applied risks, among which should be the level of the liquid. | | 2. If you want to add a liquid, wipe and remove tank stopper. In the master cylinder reservoir with brake fluid Only top up with the recommended grade, blending liquids of different brands is not allowed, since the brakes may fail. | | 3. Top up the fluid should be checked for contamination in the reservoir. If there is dirt or large precipitate particles, the liquid must be drained and replaced. | | 4. After the restoration level tighten the tank cap. | | 5. allowed a slow lowering of the fluid due to brake pad wear. If you need to frequently add brake fluid in a hydraulic system has a leak that should be repaired immediately. |
|
|
