1. Tune in to the desired station using one of the following methods. The display shows the tuned frequency. |
Setting in Program mode |
2. Use to set to a pre-programmed station (see. Subsection 1.5.3). Press repeatedly button LMU as long as the display shows the selected information. |
3. Press the number that has been pre-assigned to the desired station. It is tuned to the desired station, and the display will show the number buttons desired station. |
Mode of continuous search |
4. In this mode, automatic station search. After receiving station setting is automatically terminated. Press simultaneously on both parties of button TUNE SEEK and wait for the continuous tone. The receiver will start to automatically search for the nearest station with a higher or lower frequency broadcast. After confident reception adjustment stops. Each time you press the button search will proceed before confident reception of the following station. If because of too weak signal can not be adjusted after a single scan of the entire frequency range, the search will continue, but if you are sensitive, and the display shows the symbol DX. |
Manual adjustment |
5. Press simultaneously on both parties of button TUNE SEEK for a period not exceeding 0.5. Each time you press the button, the jump to the frequency at which the announcement is possible. |