1. To disconnect a wire from "the minus" plug of the storage battery. |
2. Remove the trunk floor mat and remove the cover over the fuel level sensor. |
3. Disconnect from the sensor 16 terminal block with wires. |
4. Disconnect hoses 14 and 17 from the sensor 16. |
5. Unscrew the nut 15 and remove the sensor from the fuel tank 16. |
6. Remove the O-ring 21. |
7. Set the sensor 16 with a new O-ring 21. Turn the sensor so as to align the mark on the sensor and the fuel tank. |
8. Tighten the nut 15. |
9. Connect hoses to the sensor 14 and 17. |
10. Connect the electrical connector block. |
11. Install the cover in the trunk floor mat and trunk floor. |