|
printable version
Replacing the air filter element
Air filter engine working volume of 1,1 and 1,3 l
1 - panel fence of warm air; 2 - pipe; 3 - a hose of giving of warm air; 4 - a hose of giving of cold air; 5 - plate of cold air intake; 6 - thermostat; 7 - damper actuator thermostat; 8 - spring latch; 9 - a vacuum hose thermostat valve actuator; 10 - Rubber yoke; 11 - plate; 12 - a lining; | 13 - the valve of the thermostat; 14 - a cover of the filter; 15 - the filter element; 16 - the filter housing; 17 - a nut; 18 - washer; 19 - Spacing sleeve; 20 - grommet; 21 - remote bush; 22 - an adjusting washer; 23 - a spring clip; 24 - a vacuum hose from the carburettor; 25 - filter gasket |
PERFORMANCE ORDER | 1. Detach the clamps 23 and 14 to remove the cover. | 2. Remove the filter element 15. | 3. Clean cloth to plug the hole in the carburetor. Wipe with a damp cloth cover and filter housing from inside. Remove the cloth from the hole. | 4. Insert a new filter element. | 5. Replace the cover and fasten the clamps 14, 23. |
|
Air filter of engines in working volume of 1,6 and 1,8 l
1 - crankcase ventilation hose; 2 - a collar; 3 - a spring clip; 4 - a cover of the filter; 5 - remote bush; 6 - a hose of giving of warm air; 7 - a nut of fastening of an arm; 8 - a washer; 9 - an arm; 10 - a nut fastening the front of the filter; | 11 - pin with a rubber buffer; 12 - a hose supplying cold air; 13 - damper actuator thermostat; 14 - thermostat; 15 - plate; 16 - a lining; 17 - the valve of the thermostat; 18 - the filter element; 19 - a nut of fastening of the filter; 20 - the filter housing |
PERFORMANCE ORDER | 1. Unscrew the nut 10. | 2. Detach the terminals 3 and 4 to remove the cover. | 3. Remove the filter element 18. | 4. Clean cloth to plug the hole in the carburetor. Wipe with a damp cloth cover and filter housing from inside. Remove the cloth from the hole. | 5. Insert a new filter element. | 6. Replace the cover and fasten 4 clips 3. | 7. Tighten the nut 10. |
|
|
|