1. To disconnect a wire from "the minus" plug of the storage battery. |
2. The pump to pump fuel from the tank, as have no fuel tank drain plug. |
3. Disconnect from the fuel level sensor 16 terminal block with wires and pipes 14 and 17 (see. Subsection 3.1.7). |
4. Raise the jack back of the car and establish on supports, remove the rear right wheel. |
5. Loosen the screws securing the inlet pipe 5. |
6. Place the jack under the fuel tank. Between jack and tank lay a wooden lining. |
7. Remove bolts securing the fuel tank 3. |
8. Ram lowered down the fuel tank and pull it out from under the car. |
9. Place the fuel tank in the reverse order. 3 bolts securing fuel tank tighten to 25 Nm (2.5 kgf ?� m), and 5 bolts securing the filler pipe - 10 N ?� m (1.0 kgf ?� m). |
10. If you need to remove the expansion tank 22, it is necessary to turn away bolts of its fastening and remove it from the wheel well. |