REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Volkswagen Golf II, Jetta (from 1983 to 1992, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Volkswagen
	Golf 2 / Jetta
		General Information
		Engine
		The power supply system
		Coupling
		Transmission
		Transmission
		Front-wheel Drive
		A steering
		Suspension
		Brakes
			Specifications
			Brake pedal
			Servo
			Vacuum pump (model with a diesel engine)
			The main brake cylinder
			Pressure regulator
			Front brake
			Replacing the brake pads in the brakes of type Girling
			Rear Disc Brake
			Rear drum brakes
			Bleeding brake system
			Parking brake
		Body
		Electrical

printable version

Servo

Withdrawal

PERFORMANCE ORDER

1. Remove the brake master cylinder 18 (see. Fig. Detail of a drive of brakes. See subsection 10.5).

2. Disconnect the vacuum hose 19 from the check valve 20 of the vacuum amplifier.

3. Remove the check valve 20.

4. Remove the bottom casing of the instrument panel on the driver side (see. Pp. 3-4 sub-section 8.5).

5. Run 2-4 subsection 10.2.

6. Unscrew the four nuts 24 servo mounting bracket 21 to 10.

7. Remove the vacuum booster 21.

Setting

The installation of the vacuum amplifier is produced in reverse order, taking into account the need to grease the axle 9 and the finger 1.

« previos page
Brake pedal

next page »
Vacuum pump (model with a diesel engine)