REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Volkswagen Golf II, Jetta (from 1983 to 1992, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Volkswagen
	Golf 2 / Jetta
		General Information
		Engine
		The power supply system
		Coupling
		Transmission
		Transmission
		Front-wheel Drive
		A steering
		Suspension
		Brakes
			Specifications
			Brake pedal
			Servo
			Vacuum pump (model with a diesel engine)
			The main brake cylinder
			Pressure regulator
			Front brake
			Replacing the brake pads in the brakes of type Girling
			Rear Disc Brake
			Rear drum brakes
			Bleeding brake system
			Parking brake
		Body
		Electrical

printable version

Vacuum pump (model with a diesel engine)

Vacuum pump

1 - the union;

2 - the case;

3 - gear

On models of cars with diesel engines in the vacuum amplifier ryazrezhenie created a vacuum pump driven by an intermediate shaft of the engine.

Withdrawal

PERFORMANCE ORDER

1. Disconnect the hose from the union 1 (see. Fig. A vacuum pump).

2. Remove the bolt 15 (see. Fig. Details lubrication system of the diesel engine) and remove the holder 16.

3. Remove the vacuum pump 17 with a gasket 18 and the drive gear 19.

Setting

PERFORMANCE ORDER

1. Set the vacuum pump drive gear 19 and a new gasket on the engine block 18 so that the projection on the axis of the oil pump located in the groove on the axis of the vacuum pump.

2. Install the holder 16 and tighten the bolt 15 to 25 N ?� m.

Check

PERFORMANCE ORDER

1. Disconnect the hose from the union 1 (see. Fig. A vacuum pump).

2. Start the engine.

3. Close the opening of the nozzle and check whether ryazrezhenie created. If it does not - replace the vacuum pump.

« previos page
Servo

next page »
The main brake cylinder