1. Remove the wheel covers. To do this, use a crowbar and wire bracket of a set of tools. Wire bracket is mounted on the hood or the hole edge. Pass through the mount bracket and pulling the wheel mount, remove the cap. |
2. On the car standing on the ground, tighten the hand brake and loosen the wheel bolts. |
3. Lift the proper side of the car and fix on supports. |
4. Remove the upper bolt wheels and in its place screw the dowel pin. Using the adjusting pin facilitates installation of a spare wheel. |
A warning Alloy wheels protected against corrosion by a transparent varnish. Be careful not to damage the paint. If the coating is damaged disc cover layer of varnish.
|
5. To eliminate the "kick is" drive wheel to the hub before installing the wheel, apply a thin layer of grease on the collar of the hub centering disc wheels. |
6. Before screwing do not grease the threads of bolts fastening wheel. |
7. Tightening wheel bolts produce evenly in stages in diagonal sequence. |