 printable version
Lifting sunroof mobile panel
The panel is opened and closed with the ignition by a rotary switch; by pressing or pulling the switch panel is raised and lowered. The panel can be opened or closed, and also after the ignition is switched off until one of the front doors have not yet opened.
Sliding
Turn the dial clockwise until the panel the desired position. In position A roof hatch is fully opened.
Closing
To close, turn the switch to position B.
Climb
Quickly click on the corresponding face of the switch (see. Arrow) - the panel is fully raised. Quickly pull the switch - panel is completely closed. A long press or pulling the switch panel can be installed in any desired position. For vehicles with a glass roof panel is slid in the panel but simultaneously automatically opens the sliding screen to protect against strong sunlight. In the closed roof panel as desired it can be shifted back by hand.
Convenient closing panel
The sliding panel can be covered not only by the switch, but also when locking one of the front doors of the car: hold the key in the locking position, or hold the button down until the radio remote control until the bar closes.
Procedure for failure of the drive mechanism
When failure of the drive mechanism of the roof panel can be closed manually.
| PERFORMANCE ORDER | | 1. Remove the plastic cover on the back side with a screwdriver. | | 2. Remove the crank knob from the holder cover, insert it in the hole and close the sliding panel. | | 3. Insert the knob into the holder and replace the cover. |
|
| 
