 printable version
Storing adjustments of a seat and external mirrors for advance
| PERFORMANCE ORDER | | 1. Turn on the ignition. | | 2. Adjust the seat position. | | 3. Set the position of the two exterior mirrors. | 4. Press one of the memory buttons D and hold it down for about three seconds until the long beep certifies the successful completion of the process of remembering.
These adjustments included in the memory under the chosen key. |
|
We recommend that you start filling memory left button and point to every other driver of his key. Each new making adjustments to the memory device erases from the memory the previous adjustment on the key. When unplugging from the electrical system battery all contributed to the memory seat adjustment and exterior mirrors are cleared.
Storing exterior mirror adjustment when reversing
You can change the adjusted position of the right mirror for reversing and make new adjustments made in accordance with your requirements, in the memory.
| PERFORMANCE ORDER | | 1. Switch the setting of the door mirrors on the right mirror. | | 2. Engage reverse gear. | | 3. Set the right mirror. | 4. Press the memory D, which are included in the memory seat adjustment and exterior mirrors when driving forward progress, and hold down the button for about three seconds until the long beep certifies the successful completion of the process of remembering.
This adjustment is now entered in the memory under the selected memory button. |
|
Once you select reverse gear right mirror will move to the preset position. This process will be interrupted when you manually start installing a mirror to the new desired position for you. Once you turn off the reverse gear right mirror will move back to the proposal made to the memory position when the forward travel. With each new introduction to the memory seat adjustment and exterior mirrors for forward travel, you should also re-make in memory individual adjustment of the right mirror for reversing, otherwise it will remain effective the previous adjustment.
Harmonization of key radio remote control with buttons Memory
To memorized adjustment could also be caused by a radio remote control, you should carry out coordination of key radio remote control with each key memory. We recommend one of the two included with the new radio remote control car keys align with the left button of the memory, and the other key - with the middle button. Another key radio remote control you may want to order your service enterprise a Volkswagen, and then match it with the right key memory.
Harmonization of key radio remote control should be carried out in the following sequence. After making adjustments in memory seats and exterior mirrors are at your disposal 10 seconds on key negotiation with the appropriate memory button.
| PERFORMANCE ORDER | | 1. Remove intended to harmonize remote control key from the ignition. | 2. Press the release button of the key and hold it down for about a second before until you hear a beep, indicating the successful completion of the harmonization process.
Thus, the required data have been entered into the memory at the selected key memory. |
|
If the first remote control key has been agreed with the other key memory, all data is erased prior coordination. If the key is consistent with the memory buttons, which had previously been agreed with the other key, all previous data is erased by agreement. Reconciliation key to key memory is still valid in the case when, under the key memory introduced new seat adjustment and exterior mirrors. When disconnecting the battery from the electrical system, all data on the key agreement with the keys will be erased.
| 
