 printable version
Replacement of bulbs of internal illumination
Location of bulbs of internal illumination in the car
1 - a lantern lighting the glove box,
2 - Front interior lighting lamp and the lamp for reading,
3 - front lights interior lighting,
4 - tail light interior lighting, | 5 - luggage compartment light,
6 - Reflector indoor lighting,
7 - entrance lights,
8 - the switch of a control lamp of a manual brake |
Front ceiling lamp and lamp for reading
| PERFORMANCE ORDER |  | 1. Remove the lens. To do this, insert the blade of a knife or other similar object into the slot between the housing and the diffuser (arrow) and gently pry the lens. | | 2. Press and in this position, turn counterclockwise to extract the bulb from its socket. | | 3. Install a new bulb into the socket, press and in this position, turn it clockwise to lock the bulb holder in it. | | 4. Place the first lens of the two small locating lugs to the frame switch, then push up the front of the lock up both the long mounting projections in the holder. |
|
Rear Courtesy light
| PERFORMANCE ORDER |  | 1. Remove the entire frame ceiling, which insert the flat end of a screwdriver between the glass and the ceiling upholstery (arrow) and carefully pry it with a screwdriver. | | 2. On the back side of the plastic cover slide sideways. | | 3. Remove the defective bulb and insert a new lamp. | | 4. Slide the side cover until it locks. | | 5. Please set the frame from the slot, and then push it into the slot in the headliner. |
|
Entrance lights in the door
| PERFORMANCE ORDER |  | 1. Remove the lamp holder completely. To do this, insert the flat end of a screwdriver into the recess (arrow) between the lantern and the door trim and then hooked a lamp holder, lift it until then, until you can remove it in the reverse direction of the upholstery. | | 2. Remove the defective bulb and insert a new lamp. | | 3. Insert the lamp holder from the slot, and then push it into the slot in the door trim. |
|
|
