The device for adjusting the headlight is on the engine bulkhead. On the back of the headlamp has two control (Fig.
334). The figure shows the right light. We left headlight adjusters are reversed.
Adjust the headlights should be using a special adjustment of the device, and only as a last resort you can try to correct the adjustment or change it. To adjust the car set perpendicular to the wall of the garage door or at a distance of about 5 meters and turn on the lights. To adjust the headlamp insert, as shown in Fig.
335, a Phillips screwdriver through the hole on the spotlight. To prevent damage to the controller, it is necessary to use a very thin screwdriver. If you insert a screwdriver into the opening 2 as shown in Fig.
336, and rotate the knob to the right, the beam headlamp rises. If you insert a screwdriver into the hole 1 and Turn right, then beam headlights shifted to the central longitudinal axis of the vehicle. By turning the knob to the left beam is displaced in the opposite direction.
