 printable version
Disassembly and assembly of lights
| Fig. 350. Individual elements of Lights: 1 - screw 8 Nm; 2 - locking clip; 3 - the lamp housing; 4 - the ventilation device; 5 - a cover; 6 - side light bulb holder; 7 - double-stranded Lamp, H4; 8 - incandescent lamp of dimensional light; 9 - a reflector; 10 - rubber gasket; 11 - headlamp lens; 12 - the screw fastening; 13 - the motor that rotates the reflector lights
|
No need to completely replace the lamp, if it is broken or damaged reflector diffuser. Farah can be disassembled into components (see. Fig. 350). Dismantling spend lights in the following order: - Remove the front turn signal; - Remove the grille; - Using a screwdriver, carefully remove the five mounting clips of the lens, which are arranged around the perimeter; - Remove the headlamp lens and the rubber gasket. The installation of lights spend in the reverse order, following these guidelines: - Do not touch the reflector with your bare hands; - Always replace the rubber seal the headlamp; - Clamp on the lens is set manually on the old place; - After the headlamp adjustment is required to pass it.
| 
