REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Volkswagen Sharan (from 1995 to 2000, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Volkswagen
	Sharan
		Introduction
		VR6 engine
		The two-liter engine (ADY)
			Refitting
			Disassembly and assembly
			Cylinder head and valves
			The pistons and connecting rods
			Cylinder block
			Crankshaft and main bearings
			Drive timing
				Removing the toothed belt
				Installation of the timing belt
				Installation of ignition
			Adjust the belt tension engine units
			Countershaft
			Compression check in engine cylinders
			Exhaust
			Cleaning system with activated carbon
			Exhaust gas recirculation
		Engine oil
		Cooling
		A fuel injection system VR6 engine
		The system Simos injection 2.0-liter engine
		The ignition system
		Coupling
		Manual 5-speed gearbox
		The drive shafts
		Power steering
		Front suspension
		Rear suspension
		Brakes
		Electrical
		Diesel engine
		The lubrication system of the diesel engine
		The cooling system of the diesel engine
		The power supply system of the diesel engine and turbocharger
		Map service.
		Applications
		Wiring

printable version

Drive timing

3.7.1. Removing the toothed belt

3.7.2. Installation of the timing belt

3.7.3. Installation of ignition

Toothed belt with the device for belt and the crankshaft gear

Fig. 103. The timing belt with a device for tensioning the belt and the crankshaft gear: 1 - timing belt; 2 - toothed crankshaft pulley; 3 - bolt 80 Nm; 4 - tensioner timing belt; 5 - a washer; 6 - nut 45 Nm

Camshaft drive toothed belt 1 is carried out (see. Fig. 103) of the pulley 2 mounted on the crankshaft. The same belt driven in rotation of the intermediate shaft and the pulley.

The belt tension is regulated by established tension roller with adjustable cam.

The toothed belt has a lifespan of up to 100 000 km.

« previos page
The drive pulley of the torque converter (for vehicles with automatic transmission)

next page »
Removing the toothed belt