 printable version
Replacing the wiper arm
Replace the wiper arm performed as follows: - Turn off the wiper; - Slide the safety cover and loosen, became visible, the hex nut (do not remove it completely); - Rocking lever brush back and forth, so that it is disengaged; - Is now completely unscrew the nut and gently pull the lever of the brush; - Slide the new brush lever in the correct position and place it on the glass;
| Fig. 346. The definition of the "correct" position of the wiper blades relative to each other and the lower edge of the windscreen
|
- Check the installation of the new brushes, which measure the distance A and B (Fig. 346). If the length A is 20 mm, and the interval B = 45 mm, the brush arm is placed the correct position; - Tighten the hexagon nut torque 20 Nm; - Windshield wiper switch and make sure the wiper blades when his work keep coming back to the correct position; - Install a safety cover to its original place.
| 
