| 1. Remove the brake pads. |
| 2. Clean the brake pads and brake with a soft wire brush or rag soaked in gasoline. |
A warning  Brake dust, do not breathe!
|
3. Apply the paste "Plastilube" or heat-resistant lubricant, for example: "Liqui Moly LM-508-ASC" in the following places:
- All available seat backs of the plates the brake pads;
- End of the pistons;
- The surfaces of the brake supports;
- Slip surface brake (seats). |
A warning The lubricant should not get to the friction surface of the brake disc or brake pads. If possible, remove the remains of trapped grease rag, if necessary - clean gasoline.
|
| 4. Install the brake pads. |
