add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Hyundai Elantra (from 2000 to 2004, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks
Hyundai Elantra
Home
 
Hyundai
Elantra
Gasoline engines 1.6, 1.8 and 2.0 liters
The diesel engine of 2.0 liters
Greasing system
Cooling
Fuel system
Control systems and emission control
Ignition system
The system of preliminary heating of the diesel engine
Coupling
Manual transmission
Automatic Transmission
Drive shafts, front and rear axles
Suspension
Steering
Brakes
Technical data
Check the brake servo
Check unilateral vacuum valve
Bleeding the hydraulic system of a drive of brakes
Adjust the parking brake stroke
Brake pedal
Vacuum brake booster
The main brake cylinder
Replacing the front brake pads
Caliper front brake
Rear disc brakes
Rear drum brakes
Replacing the working brake cylinder
Pressure regulator
Brake tubes and hoses
Parking brake
Anti-lock brakes (ABS)
Hydraulic block HECU
Wheel speed sensor
Bleeding the hydraulic system of a drive of brakes with scanner use
Troubleshooting
Body
The air conditioning system
Electrical equipment
Electrical diagrams
 


Hit Counter by Digits


print page printable version

Replacing the working brake cylinder



PERFORMANCE ORDER

  1. Remove the brake pads.
  2. Disconnect the brake tube.
  1. Remove the bolts and remove the working brake cylinder.
  1. Remove the dust covers from the working brake cylinder.
  2. Remove the piston.
  1. Remove the return spring.
  1. Before assembly, the working brake cylinder, check the condition of the following parts:
    - Cylinder and piston for wear, damage and corrosion;
    - The case of the working brake cylinder for damage and cracks;
    - The contact surface of the piston and the brake pads for wear;
    - The lack of a piston internal porosity.
  2. The assembly is carried out in sequence, return dismantling.

  1. Before assembly, clean the working brake cylinder with isopropyl alcohol.
  2. Before assembly, lubricate the brake fluid piston and cylinder.
  3. When assembling the need to use new cuffs and dust covers.

Be careful not to lose the steel ball drain valve.





« previos page
Rear drum brakes
next page »
Pressure regulator

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.