 printable version
Note on disassembling
The body of the manual valve
| PERFORMANCE ORDER |  | 1. Remove the bolts. |  | 2. If you remove the housing, disconnect the manual valve stem of the manual valve lever and remove from the body. |
|
Note assembly
Brake piston downshift
| PERFORMANCE ORDER |  | 1. After installing the downshift using compressor blow channels for oil-free compressed air at a pressure of 39.2 kPa, and at the same time check the stroke. The nominal value of the stroke: 5,48-7,02 mm | | 2. When others pick up the new values of the piston rod. |
|
Brake 1st and Reverse
| PERFORMANCE ORDER |  | 1. With the compressor blow channels for oil-free compressed air under pressure 392.4 kPa, and at the same time check the stroke. The nominal value of the stroke: 1,750-2,550 mm | | 2. When others pick up the new values of the piston rod. |
|
The axial clearance of input shaft
| PERFORMANCE ORDER |  | Dial indicator, measure the input shaft end play. The axial clearance of input shaft: 0,372-0,900 mm | |
|
Locations bearings
| Name | A | AT | C | D | E | F | G | H | I | Ring
(The front side) | Outside diameter | 58.0 | - | 54.0 | - | - | 41.0 | - | - | - | | Inner diameter | 43.8 | - | 39.0 | - | - | 13.5 | - | - | - | | Bearing | Outside diameter | 61.7 | 88.7 | 57.0 | 67.0 | 42.0 | 41.7 | 71.0 | 41.8 | 57.3 | | Inner diameter | 46.0 | 72.4 | 39.0 | 50.0 | 22.1 | 23.0 | 49.0 | 28.6 | 57.3 | Ring
(Rear side) | Outside diameter | - | - | - | - | - | 41.0 | 71.0 | 42.1 | - | | Inner diameter | - | - | - | - | - | 15.3 | 49.1 | 29.1 | - |
|
