add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Sephia / Shuma (1995 release)

general info. full specifications. diagnostics. hints. tips. tricks
Kia Sephia / Shuma
Home
 
Kia
Sephia / Shuma
Maintenance
Engine
Greasing system
Cooling
The power supply system and release
Fuel system
Ignition system
Coupling
Manual transmission
Automatic Transmission
Axes and power shafts
Steering
Wheels and tires
Brakes
Suspension
Technical data
Check and adjust wheel alignment
Lower arm front suspension
Front stabilizer
Cross-section drafts and the longitudinal lever Rear suspension
Rear anti-roll bar
The transverse beam rear suspension
Repair strut front suspension
Repair strut rear suspension
Body
The air conditioning system
Electrical equipment
 


Hit Counter by Digits


print page printable version

Repair strut rear suspension



Elements strut rear suspension

1 - lock nut rod;
2 - washer;
3 - a plate;
4 - the top support of a rack;
5 - the top lining of a spring;
6 - dust cover;
7 - coil spring;
8 - Lower spring pad;
9 - the buffer;
10 - Stand with damper

Dismantling

PERFORMANCE ORDER
1. Remove the rear spring and shock absorber.
2. Remove the two mounting bolts.
3. Secure the top support of a rack in a vice.

A warning

Close sponges of a vice plates from a soft material.


4. Loosen the lock nut for two or three turns.

A warning

Do not remove the nuts completely.


5. Special adaptation OK2A1 341 001 compress a spring strut rear suspension.
6. Remove the lock nut and remove the washer.
7. Remove the top support strut rear suspension, the upper spring seat, the top lining of a spring, coil spring, dust cover, a bottom lining of a spring and a buffer.

Check

PERFORMANCE ORDER
Check the following items strut front suspension and, if necessary, replace them:
a. Grasp the shock-absorber rod a few times and push and pull it out of the shock absorber;
b. check that the rod moves smoothly, without jamming and the force applied to the stem does not change with each turn;
c. make sure that when the rod no extraneous noise.

Assembly

PERFORMANCE ORDER
1. Secure the shock absorber in a vise.

A warning

Close sponges of a vice plates from a soft material.


2. Set the bottom lining of a spring in the spring seat from the Rack.
3. Special adaptation OK2A1 341 001 compress a spring strut front suspension.
4. Install the coil spring, setting the lower end of the spring into the recess.
5. Install the dust cover, and a buffer.
6. Establish the top lining of a spring and the top support of a rack, aligning the two upper guide bushing bearings and bottom bracket stands.
7. Install washer and lock nut and stem, a little, tighten it.
8. Remove special adaptation OK2A1 341 001 to compress the spring.

A warning

Check that the coil spring is correctly placed in the top and bottom slots.


9. Close the jaws of a vice plates from a soft material and secure the top support of a rack in a vice.
10. Tighten the lock nut shaft torque.

Torque: 64-80 N ??? m
11. Replace the nut dust caps.




« previos page
Repair strut front suspension
next page »
Body

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.