REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Sephia / Shuma (1995 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Sephia / Shuma
		Maintenance
		Engine
		Greasing system
		Cooling
		The power supply system and release
		Fuel system
			Technical data
			Removing the pressure in the fuel system
			Activation of the fuel system
			Check of residual pressure in the fuel system
			Check fuel lines
			Fuel pump
			Check the maximum pressure created by the pump
			Checking the fuel pump relay
			Checking the fuel injector
			Check of tightness of fuel atomizers
			Checking the fuel injector
			Check of resistance of fuel atomizers
			Fuel tank
			A fuel supply unit
			Pressure regulator
			Fuel lines
			Tube neck toplivonalivnoy
			Fuel filter
			Quick connections
			Fuel line
			Fuel injectors
		Ignition system
		Coupling
		Manual transmission
		Automatic Transmission
		Axes and power shafts
		Steering
		Wheels and tires
		Brakes
		Suspension
		Body
		The air conditioning system
		Electrical equipment

Check the maximum pressure created by the pump

PERFORMANCE ORDER

1. Disconnect the negative battery terminal.
A warning The fuel system is under pressure even after the engine is switched off, therefore before a detachment of pipelines it is necessary to remove pressure in fuel system.
2. Remove the fuel pressure.
3. Lift the car.
	4. Connect the measuring instrument OK2A1 about 131,110 A fuel filter.
5. Connect the cable to the negative terminal of the battery.
	6. An additional wire connect plugs FUEL PUMP (the fuel pump) and In + a diagnostic socket.
7. Turn on the ignition.
8. Check the maximum pressure created by the fuel pump. The maximum pressure created by the fuel pump: 450-650 kPa.
9. If the pressure created by the fuel pump is not correct, replace the fuel supply.

« previos page
Fuel pump