1. Remove the injector with the fuel line. |
2. To supply the fuel to the injectors, fuel line hose to connect to the fuel line. |
3. Connect the connectors to the injectors. |
4. An additional wire connect nozzles with a wire (BRN) of the control unit and the ground. |
5. Turn on the ignition. |
| 6. Using a measuring container, measure the volume of fuel spray nozzle for 1 min. Performance Fuel Injector: 130 cm 3 / min |
7. If the performance of the nozzle is not correct, replace the nozzle. |
A warning When reinstalling the fuel lines and injectors use new O-rings after coating them with a thin layer of engine oil.
|