REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Sephia / Shuma (1995 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Sephia / Shuma
		Maintenance
		Engine
		Greasing system
		Cooling
		The power supply system and release
		Fuel system
			Technical data
			Removing the pressure in the fuel system
			Activation of the fuel system
			Check of residual pressure in the fuel system
			Check fuel lines
			Fuel pump
			Check the maximum pressure created by the pump
			Checking the fuel pump relay
			Checking the fuel injector
			Check of tightness of fuel atomizers
			Checking the fuel injector
			Check of resistance of fuel atomizers
			Fuel tank
			A fuel supply unit
			Pressure regulator
			Fuel lines
			Tube neck toplivonalivnoy
			Fuel filter
			Quick connections
			Fuel line
			Fuel injectors
		Ignition system
		Coupling
		Manual transmission
		Automatic Transmission
		Axes and power shafts
		Steering
		Wheels and tires
		Brakes
		Suspension
		Body
		The air conditioning system
		Electrical equipment

printable version

Fuel tank

Withdrawal

A warning

Gasoline is explosive, therefore at work with elements of fuel system provide normal ventilation of the workplace, do not use fire, the sparking devices open by fire-dangerous light devices and do not smoke. Before removal, drain the fuel from the fuel tank. Clean the fuel tank from the fuel vapor.

PERFORMANCE ORDER

1. Remove the fuel pressure.
2. Disconnect the negative battery terminal.
3. Remove the rear seat cushion.
4. Disconnect from the fuel supply unit.
	5. Remove the three screws that secure the cover.
	6. Remove the rubber ring and disconnect wires from the cap.
7. Remove the cover.
8. Disconnect two fuel hoses from the fuel supply unit.
9. Lift the car.
10. Establish a jack under the fuel tank.
11. Disconnect two fuel hoses from the fuel filter.
12. Remove the hose of the fuel vapor from the double valve.
13. Loosen the hose clip to the fuel tank.
14. Remove the screws that secure the insulator.
15. Remove the two screws on the fuel tank belts.
A warning Close all open the opening of the fuel tank in order to prevent the output from the tank to the fuel vapor.
16. Remove the fuel tank from under the car.
A warning Even in an empty fuel tank has a fuel vapors that are explosive, so be careful. Provide adequate ventilation of the workplace, do not use fire, the sparking devices open by fire-dangerous light devices and do not smoke. As soon as possible, clean the fuel tank from the fuel vapor.

Setting

PERFORMANCE ORDER

1. Raise the vehicle.
2. Remove the cover, closing all the openings of the fuel tank.
3. Place the fuel tank on a jack and lift the car.
4. Connect the hose to the fuel tank and fix its collar.
5. Connect the fuel tank, two fuel hose.
A warning Put drain hose fitting on the fuel vapor fuel tank by at least 25 mm. Hose toplivonalivnoy neck and a tube slide on fitting on 35 mm.
	6. Install the fuel tank mounting tape.
7. Return the bolts tapes of the fuel tank. Torque: 43-61 N ??? m
8. Install the insulator and fix bolts.
9. Lower the car.
10. Connect the two hoses to the fuel supply unit.
	11. Replace the rubber ring and fix wires on a cover.
	12. Replace the cover and tighten the three screws. The inhaling moment: 10,8-16,7 N ??? m
13. Connect the power supply unit of fuel.
	14. Secure the wire connector with adhesive tape.
15. Install the rear seat cushion.
16. Connect the cable to the negative terminal of the battery.

« previos page
Check of resistance of fuel atomizers

next page »
A fuel supply unit