REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Sephia / Shuma (1995 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Sephia / Shuma
		Maintenance
		Engine
		Greasing system
		Cooling
		The power supply system and release
		Fuel system
			Technical data
			Removing the pressure in the fuel system
			Activation of the fuel system
			Check of residual pressure in the fuel system
			Check fuel lines
			Fuel pump
			Check the maximum pressure created by the pump
			Checking the fuel pump relay
			Checking the fuel injector
			Check of tightness of fuel atomizers
			Checking the fuel injector
			Check of resistance of fuel atomizers
			Fuel tank
			A fuel supply unit
			Pressure regulator
			Fuel lines
			Tube neck toplivonalivnoy
			Fuel filter
			Quick connections
			Fuel line
			Fuel injectors
		Ignition system
		Coupling
		Manual transmission
		Automatic Transmission
		Axes and power shafts
		Steering
		Wheels and tires
		Brakes
		Suspension
		Body
		The air conditioning system
		Electrical equipment

Fuel pump

Check

PERFORMANCE ORDER

	1. An additional wire connect plugs FUEL PUMP (the fuel pump) and In + a diagnostic socket.
2. Remove the cap from the fuel filler toplivonalivnoy.
3. Turn on the ignition.
4. Determine whether the fuel pump, listening to the noise generated by the pump through toplivonalivnuyu neck of the fuel tank.
5. Replace the cover toplivonalivnoy neck.
	6. If you do not hear the noise generated by the fuel pump, measure the voltage between wire PNK / BLK pump connector and ground. Voltage: 12V
7. If the voltage is not correct, check the relay and the power supply circuit of the fuel pump.
8. If the voltage is less than the required, check for continuity between the wires PNK / BLK and BLK connector of the fuel pump.
9. If the conductivity is available, replace the fuel supply.
10. In the absence of conductivity reconnect to the ground.