REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Sephia / Shuma (1995 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Sephia / Shuma
		Maintenance
		Engine
		Greasing system
		Cooling
		The power supply system and release
		Fuel system
		Ignition system
		Coupling
		Manual transmission
		Automatic Transmission
		Axes and power shafts
		Steering
			Technical data
			Check of a steering without the amplifier
			Check steering with hydraulic booster
			Belt drive power steering pump
			Replacement of a protective cover of steering draft
			The steering shaft
			Steering transfer
			Power steering pump
			Repairing the steering shaft
			Repair of steering transfer
			Repair of power steering pump
		Wheels and tires
		Brakes
		Suspension
		Body
		The air conditioning system
		Electrical equipment

Repairing the steering shaft

The steering shaft

1 - steering wheel lock;
2 - universal joint;
3 - the steering shaft assembly;

4 - an intermediate shaft;
5 - coupling bolts

Dismantling

PERFORMANCE ORDER

1. Securely attach the steering wheel lock, then a chisel and hammer, make an indentation (groove for a screwdriver) in the heads of two bolts bolt steering lock.
A warning Fix the steering column in a vice jaws close brass or cloth.
	2. Secure the steering column in a vice and a screwdriver, turn the lock bolts.
	3. Remove the lock with the steering column.
4. Remove the two coupling bolts of the universal joint connecting the steering and intermediate shaft.
5. Remove the intermediate shaft.

Check

PERFORMANCE ORDER

	1. Check the wear sleeve and the steering column universal joint connections backlash and smoothness of movement and lack of noise in the process.
2. Ensure that the steering shaft does not turn the key in position LOCK, and freely rotated in any other position.

Assembly

PERFORMANCE ORDER

1. Install the intermediate shaft pinch bolt.

Torque: 18-26N ??? m

2. Install the universal joint shaft on the steering column and intermediate shaft, and then tighten the two clamping screws on the universal joint.

Torque: 18-26N ??? m

3. Install the steering column lock. Screw new bolts steering lock, and tighten them until the bolt heads are not srezhut.