REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Kia Sportage (1999 release)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Kia
	Sportage
		Introduction
		Controls and operation receptions
		Current care and maintenance
		Engine
		System of cooling, heating, ventilation and air conditioning
		The power supply system, motor control / emission control and exhaust
		Systems of an electric motor
		A five-speed manual gearbox gear
		Automatic Transmission
		Transmission Line
		Brakes
		Suspension and steering
		Body
			general information
			Outdoor equipment and body parts
			Salon Equipment
		Onboard electric
		The control body dimensions
		Wiring

Body

Specifications

Overview

Body
Type	5-door station wagon (standard or extended - Grand), or convertible
Design	The body is located on a curved ladder frame construction
Notation in the Manual of body struts (front to back)	A, B, C and D

Weight and size characteristics of the car

Fixed glass

Type of mounting sealant	V001 77 739 (classification KIA)
The thickness of the cushion sealant mm	eleven
The length of time of hardening sealant h
Surface hardening (approximately)
At 5 ?° C.	15
At 20 ?° C	1
At a temperature of 35 ?° C	0.6
Final polymerization (the car can approved for use)
At 5 ?° C.	12
At 20 ?° C	4
At a temperature of 35 ?° C	2

Control body sizes

Efforts of a tightening of carving connections, Nanometer

Efforts of a tightening of certain fastener elements can be shown directly in the section where they are highlighted in bold.

Looped bolt bonnet	19 ÷ 26
Fixing the bonnet assembly
Bolts	7.8 ÷ 11
Nuts	20 ÷ 26
Bolts resistant bumpers	16 ÷ 23
The hinge screws the doors
Side doors	18 ÷ 29
Tailgate	16 ÷ 24
Bolts travel stops opening doors	18 ÷ 29
Bolts exterior door handles	9 ÷ 13
Bolts assemblies door locks	4 ÷ 6
Nuts of fastening of activators of door-locks	2
Bolt of door glasses	8 ÷ 11
Nuts of fastening regulators windows	9 ÷ 13
Bolt of fixed glass rear doors	9 ÷ 13
Bolts glasses to regulators	6
Screws fastening brackets poruchnevyh handles	2
Ball studs telescopic stops the tailgate	8 ÷ 10
Fasteners (bolt and nut) drive rod assembly of the front wipers	7 ÷ 10
Bolts e / motor drive wipers (front and rear)	7 ÷ 10
Spindle wiper arm nut (front and rear)	10 ÷ 14
Bolts dashboard
In addition to the upper central	9 ÷ 14
Top center (under the decorative cover)	4 ÷ 6
Bolts Seat	38 ÷ 51
Bolts knuckle front seat backs	34 ÷ 56