|
|
 printable version
Suspension and steering
Specifications  | Separate characteristics are resulted also in the text of the chapter and in the case of compulsion of their performance are highlighted in bold. |
Total information Front suspension | Design | Independent, double wishbone with rackmount assembly to the helical springs and stabilizer bar (see. Graphic scheme of the front axle) |
Rear suspension | Design | Dependent with beam axle, two lower and one upper trailing arms, telescopic shock absorbers, coil springs mounted separately and reactive pole (see. Graphic scheme of the rear axle) |
Steering | Design | | Under the scheme "Keystone" (see. Graphic scheme of the steering linkage) by hydrostrengthening transmission type "screw - ball nut" | | Adjustable, injury prevention, with flexible joint | | Steering ratio | 15.2: 1 | | The type and amount of fluid power steering | See. Specifications to the Head Current leaving and service | | The nominal length of the steering column (see. mm | 766.5 | | The outer diameter of the steering wheel, mm | 390 | | The total number of turns of the steering wheel | 3.54 | | The value of a free wheeling of a steering wheel (see. mm | 5 ÷ 30 | | The maximum permissible value of the resistance to rotation of the steering wheel (see. H | 33 | | Head, developed by the steering pump kPa | 6860 ?� 98 | | The magnitude of the deflection of the steering pump drive belt when pressed with a force of 1 kgf mm | | 6 ÷ 7 | | 8 ÷ 10 | | The pushing force bipod steering, Nm | 88 |
The suspension geometry Frame See. The control body dimensions at the end of the Guide. Wheel alignment Wheel alignment | | Convergence, mm | | | 2.5 ?� 2.5 | | 0 | | 0 | | Camber | | | 0.44 ?� ?� 0.75 ?� | | 0 ?� ?� 0.75 ?� | | 0 ?� | | Coasting (only the front wheels) | | 3.58 ?� ?� 0.75 ?� | | 3.58 ?� ?� 0.5 ?� | | The maximum goal of turning wheels | | 37 ?� | | 33 ?� |
Efforts of a tightening of carving connections, Nanometer Front suspension | | Nuts of fastening rod stabilizer bar bolts to the ball tips axial bolts mount assemblies | 43 ÷ 54 | | Nuts / bolts fastening clamps resistant to a stabilizer bar | 21.5 ÷ 26.5 | | Bolts of fastening of the stabilizer to the frame struts | 37 ÷ 46 | | Nuts piston rods of shock absorbers | 37 ÷ 46 | | Nuts axial bolts mount forks to the lower control arm | 183 ÷ 211 | | Nuts upper coil spring cups | 22 ÷ 27 | | Coupling bolt mount plugs | 43 ÷ 54 | | Tightening bolts of the upper ball joints | 43 ÷ 54 | | Nuts spindle bolts upper suspension arms | 75 ÷ 93 | | Castellated nut lower ball joints | 118 ÷ 157 | | Bolts lower ball joints to the control arm | 18 ÷ 27 | | Spindle nut bolts of the lower suspension arms | 260 ÷ 299 |
Rear suspension | | Nuts upper strut |
55 ÷ 64 | | Nuts and bolts of the lower strut | 75 ÷ 93 | | Nuts axle bolts of the upper and lower trailing arms | 75 ÷ 93 | | Nuts axial bolts diagonal jet bar Panharda | 75 ÷ 93 |
Steering | | Union nuts choke connector adapter accessories to connect the pressure gauge to measure the pressure in the discharge path GUR | 31 ÷ 47 | | Union nuts choke connectors power steering pressure lines | 31 ÷ 47 | | Coupling bolt clamp fixing the universal joint of the intermediate steering shaft | 18 ÷ 26 | | Fixing the lower steering column support bracket | | 19 ÷ 23 | | 16 ÷ 23 | | The upper support clamp bolts fastening the steering column | 16 ÷ 23 | | Nut steering wheel | 39 ÷ 49 | | Lock nut fastening lugs on the rods steering rods | 88 ÷ 118 | | Castellated nut ball finger tips of steering drafts | 42 ÷ 57 | | Bolts idler arm assembly of the steering gear | 206 ÷ 225 | | Bolts of fastening of the steering mechanism | No data available | | Nut bipod to the shaft of the steering mechanism | 206 ÷ 245 | | Lock adjusting nut sector shaft | 39 | | Cover bolts sector shaft | 34 | | Bolts of a cover of the worm shaft | 34 | | Nut connecting rod to the idler arm | 42 ÷ 57 | | Nut connecting rod to pitman arm steering | 42 ÷ 57 | | Flare nuts GUR lines to the steering mechanism | 31 ÷ 47 | | Bolt intermediate steering shaft | 30 ÷ 38 | | Bolts of the support bracket of the steering pump | 37 ÷ 52 | | Nut steering pump pulley | 61 | | Mounting the steering pump reservoir | 6.8 ÷ 9.8 | | Locking bolt belt tensioner steering pump | 37 ÷ 52 |
|
|
