REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mazda 626 (from 1991 to 1998, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mazda
	626
		Instructions
		Maintenance
		Engines
			Petrol engines (1,6 and 1,8 liters)
				Introduction
				Specifications
				Recommendations for repair
				The top dead point
				Valve Cover
				Intake manifold
				An exhaust manifold
				Gas distribution belt and sprocket
				Seals camshaft
				And a control rocker (e) of shaft (s)
				Valve springs, fasteners and gaskets
				Cylinder head
				Sump
				Front Cover
				Oil pump
				Front crankshaft oil seal
				Flywheel
				Crankshaft rear oil seal
				Engine Mounts
			Gasoline 4-cylinder engine (2 liters)
			Gasoline engine V6 (2,5 liters)
			A partition of engines (1,6 and 1,8 liters)
			Bulkhead engine (2.0 liters and 2.5 V6)
			The diesel engine of 2.0 liters
			Systems of an electric motor
		Heating and ventilation
		Fuel system
		An exhaust system
		Transmissions
		Coupling and semiaxes
		The brake system
		Chassis
		Body
		Electrical
		Wiring
		Tips and Tricks

An exhaust manifold

Withdrawal

PERFORMANCE ORDER

1. Disconnect the negative battery terminal.
2. Disconnect the oxygen sensor, remove the sensor, if you install a new collector.
	3. Unscrew the bolts and remove the insulating screen display.
4. Lift and fix a forward part of the car.
5. Disconnect an exhaust pipe from a collector and lower the car.
6. Unscrew the bolts and remove the manifold collector.

Setting

PERFORMANCE ORDER

1. Clean the mating surface of the cylinder head and manifold. If the gasket is not leak collector, address to experts.
2. Install a new gasket.
3. Establish a collector and insert bolts.
4. Tighten the screws and set the remaining items.
5. Check the operation of the engine.

« previos page
Intake manifold