Gas distribution belt |
The length of the tensioner spring in a free state: |
- 1.6 liter | 64.0 mm |
- 1.8 liters: |
??? 1991-1994 model years of release | 58.8 mm |
??? 1995 and later | 59.2 mm |
Deviation timing belt: |
- 1.6 liter | 11.0 - 13.0 mm |
- 1.8 L | 9.0 - 11.5 mm |
Valves |
The length of the valve spring in a free state: |
- 1.6-liter model: |
??? spring intake valves | at least 39.0 mm |
??? spring exhaust valves | at least 38.0 mm |
- 1.8-liter models | at least 39.5 mm |
The clearance between the valve stem and guide sleeve | maximum 0,20 mm |
Rocker arm and the rocker arm shaft (engines SOHC) |
1.6 liters (8 valves): |
- The diameter of the rocker arm shaft | at least 17.959 mm |
- Daslyany clearance | maximum 0.10 mm |
- The diameter of the holes of the rocker | a maximum of 18,000 mm |
1.6 l (16 valves) |
- The diameter of the rocker arm shaft | at least 18.959 mm |
- Oil clearance | maximum 0.10 mm |
- The diameter of the holes of the rocker | a maximum of 19,000 mm |
Camshaft |
1.6 liters (8 valves): |
- The height of the cam | at least 35.251 mm |
- The diameter of the bearing: |
??? front and rear bearings (1 and 5) | at least 43.440 mm |
??? pentralnye bearings (2, 3 and 4) | at least 43 410 mm |
- Roundness | maximum 0.05 mm |
- Oil clearance | maximum 0.15 mm |
- Free lift | maximum 0,20 mm |
1.6 l (16 valves) |
- The height of the cam: |
??? intake valve | at least 35.629 mm |
??? the exhaust valve | at least 35.459 mm |
- The diameter of the bearing: |
??? front and rear bearings (1 and 5) | at least 43.440 mm |
??? bearing 2 and 4 | at least 43.425 mm |
??? the central bearing (3) | at least 43.410 |
- Roundness | maximum 0.05 mm |
- Oil clearance | maximum 0.15 mm |
- Free lift | maximum 0.15 mm |
1.8 l: |
- The height of the cam: |
??? intake valve | at least 43.894 mm |
??? the exhaust valve | at least 44,400 mm |
- Diameter bearings | 25.940 mm |
- Roundness | maximum 0.05 mm |
- Oil clearance | maximum 0.015 mm |
- Shaft wear | maximum 0.03 mm |
- Free lift | maximum 0,20 mm |
Oil pump |
The clearance between the driven gear and the pump housing | maximum 0,20 mm |
The clearance between the external gear and the housing | maximum 0.22 mm |
The gap between the plane and the plane of the gears of the pump housing | a maximum of 0.14 mm |
The length of the spring relief valve | at least 45.5 mm |
Valve clearances: |
- Engine capacity of 1.6 liters and 1.8 | Hydraulic adjustment |
Bolts of covers of bearings of a camshaft (1,8) | 11 - 14 |
Bolts intermediate pulley: |
- 1.6 liter | 19 - 26 |
- 1.8 L | 37 - 25 |
Bolts camshaft oil seal housing (1,8) | 8 - 11 |
Bolt camshaft sprocket | 49 - 61 |
Bolt persistent plate of a camshaft (1.6 L, 8 valve) | 8 - 11 |
The crankshaft pulley bolt | 12 - 18 |
Bolt crankshaft sprocket | 157-167 |
Bolts cylinder head: |
- 1.6 liters and 1.8 liters | 76 - 81 |
Bolts of the exhaust manifold: |
- 1.6 liter | 16 - 23 |
- 1.8 L | 38 - 46 |
Bolts insulating screen exhaust manifold | 8 - 11 |
Bolts of an exhaust pipe bracket | 37 - 52 |
Bolts flywheel cover: |
- 1.6 liter | 37 - 52 |
- 1.8 L | 65 - 88 |
Bolts flywheel | 96 - 103 |
Screws Front Cover | 19 - 16 |
Intake manifold bolts | 19 - 16 |
Bolts block main bearing caps | 16 - 20 |
Bolts of the oil pump | 19 - 16 |
Bolts of a cover of the oil pump | 6 - 9 |
Bolts maslozabornogo pipe | 8 - 11 |
Screw the back cover | 8 - 11 |
Bolts of the rocker shafts (1,6) | 22 - 28 |
Bolts of the oil pallet | 8 - 11 |
Bolts of the oil pallet (models with a separate tray) | 37 - 52 |
Bolt tensioner pulley: |
- 1.6 liter | 19 - 16 |
- 1.8 L | 38 - 52 |
Timing belt cover bolts | 8 - 11 |
Bolts intermediate timing belt pulley: |
- 1.6 liter | 19 - 16 |
- 1.8 L | 38 - 52 |
Bolts valve covers: |
- 1.6 liter | 5 - 7 |
- 1.8 liters: |
??? two screws in the rear cover | 8 - 11 |
??? screws into the top of the cap | 5 - 7 |
??? bolts securing the water pump pulley | 8 - 11 |