1. Disconnect the negative battery terminal. |
2. Remove the spark plugs. |
3. Drain the coolant. |
4. Remove the air intake pipe. |
5. Remove the resonator. |
6. Remove the throttle cable and throttle. |
7. Remove the vacuum brake hoses, fuel hose, radiator hoses, vacuum hose cruise control system and heater hoses. |
8. Disconnect all cables from the head. |
9. Remove the bolts and nuts of the water pipe. |
10. Remove the water pump pulley and the drive belt. |
11. Remove the air intake and fuel line. |
12. Remove the intake manifold. |
13. Disconnect an exhaust pipe from the exhaust manifold. |
14. Remove the valve cover. |
15. Remove the timing belt cover and distribution belt. |
16. Remove the drive belts power steering pump and alternator. |
17. Remove an arm of the generator. |
18. Remove the ignition distributor. |
19. Remove the screws power steering pump and position the pump side. |
20. Inspect the head and remove the parts prevent the removal of the head. |
21. Loosen the head bolts in stages over a quarter of a turn. Loosen the bolts in sequence of return sequence of a tightening. |
22. Remove the screws and remove the head. |
23. Inspect the head. |