| Supports (N1 and N2) of the engine and gearbox |
 | 1. Twist the nut support, securing it to the cross. |
| 2. Remove the through-bolts and remove the support bracket. |
| 3. Unscrew the bolts and remove the cross crossmember. |
 | 4. Install the new support bracket and tighten bolts. |
| The right support (N3) engine |
| 5. Unscrew and remove the through bolt support. |
| 6. Remove the dynamic damper with support. |
| 7. Twist the nuts and remove bearing bracket support. |
| 8. Install the new support, insert and tighten the bolt and nut. |
| The left support (N4) of the engine |
| 9. Remove the battery and the battery attachment. |
 | 10. Remove the bolts and nuts of the support bracket. |
| 11. Remove the screws support. |
| 12. Remove the support. |
| 13. Install the new support. |
During the test the engine must be lifted slightly to transfer the weight to the poles on a lift. 
