 printable version
Check and selection of radical bearings and bearings of rods
Causes of wear of bearings 1. Decrease in strength of metal; scratches torn
2. incorrectly planted; bright (polished) strips
3. scratched Graz; the dirt has eaten into the surface of the bearing | 4. The lack of oil; top layer was wiped
5. Excessive wear; the upper layer was wiped across the surface
6. The bearing is deformed; the top layer was wiped on a circle |
Despite the fact that the partition of the old engine bearing shells are replaced with new ones, you must carefully examine old loose leaves. Inspection of the liner can identify the cause of its deterioration. Contamination of bearings occurs due to lack of grease, dirt and other foreign particles, and corrosion of engine overload. In any case, cause damage to the bearings need to be addressed prior to the assembly of the engine. For correct selection of loose leaves be guided by size of a lubricant backlash, which can be measured with a plastic measuring tape. If you have any problems with the selection of loose leaves address to experts.
| 
