| 1. Prepodnimite front car. |
 | 2. Illuminate the left and right lamp dust hoods hinge axis (7) and check for damage, and the look for traces of grease on the cuffs and around them. |
| 3. Illuminate the left and right lamp dust caps Joint and check them for damage, thus pay attention to the oil traces on the cuffs and around them. |
| 4. In case of damage of the dust cap, for safety reasons, replace the corresponding hinge with the dust cap. Penetrating dirt surely destroys the joint. |
 | 5. Check the backlash Joint upper control arm (6). To do this, press and pull force to the front wheel and at the same time feels a finger ball joint. If there is a gap, replace the upper control arm. |
A warning  In conducting this test, the hinge must be unloaded (the car poddomkrachen).
|
 | 6. Check the clearance of the hinge axis (7). To do this, click at the bottom (arrow) in the direction of the control arm (4). |
 | 7. To check the backlash in the workshop used a special tool. If there is a backlash, replaced by a simple hinge. |
| 8. Check the rigidity of the fastening screws and a simple ball joint, but do not turn them. |
