|
|
 printable version
Checking the oil level
Checking the oil level in the power steering units
| PERFORMANCE ORDER | | 1. Remove the drain plug and remove the cover from the receiver. | | 2. The oil level when the oil is cold (ambient temperature of about 20 ?� C) in the receiver must be between the "min" and "max". | 3. If necessary, add oil to steering the company Mercedes-Benz N 000 989 88 03.
A warning  Fundamentally added only fresh oil, as is already the smallest contamination can lead to problems in the operation of the hydraulic system.
| | 4. Check for porosity or damage O-ring on the cover. | | 5. Place the cover of the pump housing and secure it with the screw plug. | | 6. Then, with the engine running, turn the steering wheel several times from stop to stop, thanks to this system is removed from the air. |
|
Checking the oil level (fluids) in the leveling / automatic locking differential
| PERFORMANCE ORDER | | 1. Place the vehicle on a level surface. | | 2. Check the oil level with the engine stopped. |  | 2a. Open the cover and pull it together with the oil level indicator (2a). | | 2b. Wipe lint-free cloth that pointer and re-insert it all the way into place. | | 2c. Pull out the dipstick and read the oil level. It should be between the "min" and "max". | 3. If necessary, top up hydraulic fluid, then use a clean funnel (60) and a fine-meshed sieve.
A warning You can only use authorized by the hydraulic oil, for example, Mercedes-000 989 91 03/10.
|
|
|
|
