 printable version
Removing the front seats
| Fig. 10.23. To remove the headrest Press the tab (arrow)
|
1. Remove the head restraints. To do this, press the release button and remove them from the backrest (Fig. 10.23). 2. Move the seat forward.
| Fig. 10.24. After removal of the lining of the locking mechanism can loosen the belt in place of the arrow
|
4. Remove the belt. Note the location of the rollers. 5. At the bottom, remove the protective liner guide rails.
| Fig. 10.25. Remove the seat mounting rails on the back
|
6. unscrew the back seat of the runners. To do this, use the hex head TORX E12 (Fig. 10.25). 7. Move the seat back.
| Fig. 10.26. The front of the guide rails of the front seat 1 - runner; 2 - a bolt with a head TORX E12; 3 - plug
|
8. Pry the screwdriver plug 3 (Fig. 10.26) of the runners and remove them. 9. Remove the bolts with TORX head in front of the runners.
| Fig. 10.27. In the reverse connection pin (arrow) pay attention to the connection, otherwise there may be problems, for example in the heating system
|
11. Remove the seat. 12. In the subsequent assembly follow the correct installation guide pins. Fastening the seat belt tighten to 35 N ?� m, seats - 50 Nm.
| 
