- Remove the drive shafts of the rear wheels.
- Remove the driveline.
- Remove the sensor anti-lock brake system (ABS), unscrewing the bolt Allen key, and move it to the side.
- Disconnect the parking brake cable.
- Slightly lower the jack-cart and unscrew the nuts rear axle housing to the crossbar.
- Taking precautions and working together, lower the rear axle, and remove it from under the car.
- Unscrew and remove the rear cover mounting bracket to the crankcase. Spend his fault detection and, if necessary, replace.
- Installation is carried out in reverse order. Self-locking bolts and nuts must be replaced. Ensure clean surface electromagnetic sensor ABS and check oil level (the car is on level ground).
|
|