- Lock the car and lift it back, remove the rear wheels.
- Drain the oil from the rear axle via the drain plug.
- Remove the brake caliper without disconnecting the hydraulic hoses, take him aside and fix.
- Lock the wheel mounting flange, unscrew the bolt shaft, remove the special washer and spacer, if any.
- Xpress drive shaft from the hub of the rear wheel using a mandrel of a soft metal, and lower on the stand.
- Place the support under the rear axle (the jack) Remove the bolts securing the rear bracket axle to the bottom of the body.
- Clean the dirt from the unit, unscrew the screws and remove the back cover, together with the bracket.
- Remove the snap ring with a differential side gear and pull the rear wheel drive shaft.
- Drive shafts tagged ?�L?� (left) and ?�R?� (right) at the inner ends can not be interchanged.
- Installation is carried out in reverse order.
- Fill in oil up to the height of the lower edge.
|
|