REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mercedes-Benz E-Class W123 (from 1976 to 1985, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mercedes-Benz
	W123
		Introduction
		Gasoline engines
		Coupling
		Manual transmission
		Automatic Transmission
			Design and specifications
			Changing the oil and oil filter, check the oil level
			Removing and installing automatic gearbox
			Transformer torque
			Maintenance and Adjustment
				Flushing oil cooler
				Adjusting the thrust control pressure
				Adjustment of draft choice of transfers
				Checking the gear
				Check and adjust the pressure modulating
				Checking the operating pressure
				Check the pressure in the centrifugal regulator
				Adjusting the switch of blocking of a starter
		Driveline and rear axle
		The front suspension
		Rear suspension
		A steering
		Brakes
		Electrical
		Body and Equipment

printable version

Adjusting the switch of blocking of a starter

The mechanism of a choice of transfers on the steering column

3 - guide arm
4 - the switch of a choice of transfers
5 - the bolts
6 - the ball joint
9 - cable
10 - a collar
14 - an arm
15 - lock nut
16 - the ball joint
18 - the gear lever
20 - ball

PERFORMANCE ORDER
Loosen the two screws on the switch of blocking of a starter.
Put the selector lever in position ?�N?�.
Insert the rod with a diameter of 4 mm through the select lever in the clutch switch to the stop in the hole the gearbox.
Tighten the locking switch starter.

« previos page
Check the pressure in the centrifugal regulator

next page »
Driveline and rear axle