Removal and installation of the fan

1. Disconnect the negative (-) cable of the battery when the ignition is off. You must first remove the air filter box of the passenger compartment.

Before disconnecting the cable, find out the radio security code, if any, address to Section Replacement of the battery.

2. Remove the fan, address to Section Removal and installation of the air filter.
3. Remove the air intake.
4. Disconnect the fan connector.
5. Remove the locking pins on the left and the right.
6. Remove the screws securing the holder lock the left and right.
7. Squeeze the retaining clips of the radiator on the right and the left and remove the lock bracket.
8. Squeeze the fan brackets on the right and left and pull the fan up.
9. Remove the fan upwards.

At the same time gently pull the holder of the lock forward.

1. Install the fan so that the slats came into foster radiator elements of the right and left.
2. The further installation is carried out in sequence, return to removal.
3. Connect the earth cable (-) battery when the ignition is switched off. Replace the cabin air filter box. If necessary, enter the code for the radio and set the time on the clock.