add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mercedes-Benz G-Class (W463, 1999 issue)

general info. full specifications. diagnostics. hints. tips. tricks
Mercedes-Benz G-class
Home
 
Mercedes-Benz
G-class
Introduction
Controls and operation receptions
Current care and maintenance
Specifications
The active warning system Maturity planned TO (ASSYST)
The routine maintenance schedule
General information about the settings,
Check fluid level, leakage control
Checking the condition of tires and pressure in them, the designation of tires and wheel rims, wheel rotation
Replacing the motor oil and oil filter
Check the brake system
Check the power supply system, replacement of the fuel filter
Check and replacement of hoses of an impellent compartment, localization of leaks
Checking the multirebernyh accessory drive belt
Check the functioning of the cooling system and frost coolant fluid replacement
Checking the exhaust system
Replacement ATF and filter AT
Visual check of tightness automatic transmission
Checking the suspension components and steering
Checking the status of anther drive shafts
Check the air conditioning system
Grease limiters door locks and cylinders
Visual inspection of safety belts and airbag modules
Verifying the headlights and horn
Check and replace wiper blades
Checking the status of the battery, care it and gymnastics
Replacing the cabin filter
Replacing the drive fluid differential lock
Replacing brake fluid
Check and replacement of spark plugs, check the status of high-voltage wires (petrol models)
Replacing the glow plugs (diesel models)
Engine
System of cooling, heating, ventilation and air conditioning
The power supply system and exhaust
Systems of an electric motor
Automatic Transmission
Transmission Line
Brakes and auxiliary systems
Suspension and steering
Body
Onboard electric
Wiring
 


Hit Counter by Digits


print page printable version

Check and replace wiper blades



Checking the Status

PERFORMANCE ORDER

  1. In the wiper blade over time accumulates the road film, reducing the effectiveness of their work, therefore the brush should be cleaned regularly in a soft cleaning solution.
  2. Build wipers with brushes should be regularly inspected. If the inspection revealed the presence of hardenings or cracks on rubber of brushes, replace brushes. If the inspection is not revealed anything unusual, wet a windscreen, include screen wipers, allow them to work a little, and turn them off. Uneven trace of the brush on the glass or on a clean glass indicate that the brush should be replaced.
  3. If brushes insufficiently well clear windshield, then the following reasons for this:
    • With the passage of the vehicle automatic washing the windscreen wax particles have got. These particles can be removed by adding a washer liquid detergent having the property of dissolving the wax;
    • Filling the tank of liquid for cleaning glasses with voskorastvoryayuschimi properties can essentially improve action of screen wipers;
    • Zhirorastvorjajushchie cleaners are not able to completely clean the glass.
  4. Damage to the brushes can also be caused by poor cleaning windows, brushes should be replaced.
  5. During the wiper mechanism can weaken the mounting nuts, so they should be checked and if necessary tighten each time at check of brushes (Refer to Chapter Body and Onboard electric equipment for more information on the mechanism of screen wipers).

Replacement

See. Section Changing the wiper blades.





« previos page
Verifying the headlights and horn
next page »
Checking the status of the battery, care it and gymnastics

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.