REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Mercedes-Benz G-Class (W463, 1999 issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Mercedes-Benz
	G-class
		Introduction
		Controls and operation receptions
		Current care and maintenance
			Specifications
			The active warning system Maturity planned TO (ASSYST)
			The routine maintenance schedule
			General information about the settings,
			Check fluid level, leakage control
			Checking the condition of tires and pressure in them, the designation of tires and wheel rims, wheel rotation
			Replacing the motor oil and oil filter
			Check the brake system
			Check the power supply system, replacement of the fuel filter
			Check and replacement of hoses of an impellent compartment, localization of leaks
			Checking the multirebernyh accessory drive belt
			Check the functioning of the cooling system and frost coolant fluid replacement
			Checking the exhaust system
			Replacement ATF and filter AT
			Visual check of tightness automatic transmission
			Checking the suspension components and steering
			Checking the status of anther drive shafts
			Check the air conditioning system
			Grease limiters door locks and cylinders
			Visual inspection of safety belts and airbag modules
			Verifying the headlights and horn
			Check and replace wiper blades
			Checking the status of the battery, care it and gymnastics
			Replacing the cabin filter
			Replacing the drive fluid differential lock
			Replacing brake fluid
			Check and replacement of spark plugs, check the status of high-voltage wires (petrol models)
			Replacing the glow plugs (diesel models)
		Engine
		System of cooling, heating, ventilation and air conditioning
		The power supply system and exhaust
		Systems of an electric motor
		Automatic Transmission
		Transmission Line
		Brakes and auxiliary systems
		Suspension and steering
		Body
		Onboard electric
		Wiring

printable version

Replacing the glow plugs (diesel models)

Details of installation of glow plugs on diesel engines (for example, 4-cylinder engine)

PERFORMANCE ORDER

Warm up the engine to normal operating temperature (80 ?� C).

Reversing candles should be made only after the engine is fully warmed up!

Remove the trim panel diffuser (2) and the cylinder head cover (1).
In the 628 series engines, remove the air cleaner (see chap. Power supply system and exhaust).
In the 612 series engines, disconnect the fuel line return line going to the pump.
Disconnect from the subject to removal glow wiring (3).
Remove the spark plug (R9).
With the help of special cylindrical brush suitable diameter clean candle niche.
Installation is in the reverse order.

« previos page
Check and replacement of spark plugs, check the status of high-voltage wires (petrol models)

next page »
Engine