 printable version
Removing and installing coil spring rear suspension
 | To perform the procedures described below require special tools to compress the coil spring. |
Withdrawal Components coil spring rear suspension
| - Poddomkratte back of the car and establish it on props, the institution under the chassis frame.
- Lift the rear axle housing by means of a jack, instigated by its central part. It is necessary to completely unload the shock absorbers.
- Disconnect the stabilizer of transverse stability by the end of his rod. Disconnect the breather hose differential.
- Give upper and lower fixing nuts and remove the lower strut of the bridge.
- Carefully lower the assembly of the bridge so that there was the possibility of removing the coil spring.
- Check the spring for cracks, deformation and weakening of the force that. If possible, compare the parameters of the spring with a new removed.
- Check the compression stroke limiter for damage and signs of aging of the material. If necessary, give fixing bolts and replace the stopper.
|
|
Setting Installation is in the reverse order. | - Make sure that the upper spring seat when the rise of the bridge was located in the right way.
- Screw the strut mounting nuts, after checking the condition of rubber plugs.
- Tighten the nuts with a torque strut 30 ÷ 40 Nm after all the weight of the car will be moved on its wheels.
|
|
|
