add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Nissan Sunny (from 1991 to 1997, the year of issue)
general info. full specifications. diagnostics. hints. tips. tricks
 Nissan Sunny
Home
 
Nissan
Sunny
Instructions
Maintenance
Engines
Cooling
Heating and ventilation system
Fuel and exhaust system
Carbureted engines
Engines with fuel injection system
The power supply / exhaust
Models with one-point electronic fuel injection
Models with multi-point electronic fuel injection
Specifications
Air filter
An accelerator rope
The accelerator pedal
Fuel Injection System
Fuel system
Fuel pump
Fuel Level Sensor
Fuel tank
Throttle Body
Elements of the fuel injection system (engines of 1.6 liters)
Elements of the fuel injection system (engines of 2.0 liters)
Intake manifold
Emission of exhaust gases
The system of the engine is started
Coupling
Transmissions
Axles
Brakes
Suspension and steering
Body
Electrical
 


Hit Counter by Digits


print page printable version

The accelerator pedal



Withdrawal

PERFORMANCE ORDER
1. Remove the lower trim panel in the driver's footwell niche.
2. Disconnect the cable from the pedal.
3. Unscrew and remove the pedal bracket to baffle assembly from the bracket.
4. If necessary, disassemble the pedal, pulling the pin, shaft and spring.
5. Check the condition of the parts, replace worn parts.

Setting

PERFORMANCE ORDER
Installation is performed in reverse order. Coat the pedal shaft with grease. After adjustment, check the cable.




« previos page
An accelerator rope		 next page »
Fuel Injection System

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.