| Type fuel pump | Electric, installed in the fuel tank |
| The pressure of the fuel pump (approximately): |
| - Models with the engine capacity of 1.6 liters | 2.5 bar |
| - Models with the engine capacity of 2.0 liters | 3.0 Bar |
| Control data elements of the power system: |
| - Models with the engine capacity of 1.6 liters |
| The resistance of the fuel pump (the tester is connected to the fuel level sensor) | 0.7 Ohm |
| The resistance of the throttle potentiometer (see. Fig. Connector potentiometer drossellnoy valve - models with manual transmission). |
| The tester is connected between the terminals "A" and "B": |
| - Throttle closed | 0.5 kilohms |
| - The throttle partially open | 0.5 - 4 kW |
| - Full throttle | 4 ohms |
| The resistance of the injector | 10 ohms |
| The resistance of the additional air supply valve | 10 ohms |
| Solenoid valve to increase the speed of the cold engine idling: |
| - At supply voltage of 12 volts between the terminals of the solenoid valve | The solenoid valve must publish a click, indicating that it is working correctly |
| The membrane switch of strengthening of a steering: |
| Upon rotation of the steering wheel | The switch closes the circuit |
| The steering wheel is fixed | The switch opens the circuit |
| The resistance of the coolant temperature sensor: |
| - A coolant temperature of 20 ?� C | 2.1 - 2.9 kW |
| - At 90 ?� C | 0.24 - 0.26 KOM |
| - 110 ?� C | 0.14 - 0.15 KOM |
| Models with engine capacity of 2.0 liters: |
| - The resistance of the fuel pump (the tester is connected to the fuel level sensor) | 0.7 Ohm |
| The resistance of the throttle potentiometer on models with a manual transmission (see. Fig. Connector potentiometer drossellnoy valve - models with manual transmission). |
| The tester is connected between the terminals "A" and "B": |
| - Throttle closed | 2 k |
| - The throttle partially open | 2 - 11 ohms |
| - Full throttle | 11 ohms |
| The resistance of the throttle potentiometer on models with automatic transmission (see. Fig. Connector potentiometer drossellnoy valve - Models with automatic transmission). |
| The tester is connected between terminals "1" and "2": |
| - Throttle closed | Continuity |
| - Throttle open | No continuity |
| The resistance of the injector | 10 - 14 ohms |
| The resistance of the additional air supply valve | 10 ohms |
| Solenoid valve to increase the speed of the cold engine idling: |
| - At supply voltage of 12 volts between the terminals of the solenoid valve | The solenoid valve must publish a click, indicating that it is working correctly |
| Resistance to air flow control valve | 70 - 80 ohms |
| The gauge of detonation combustion of fuel (see. Fig. Connector sensor Denotational combustion) |
| The tester is connected between the terminal "A" and (weight) of the car | The sensor must conduct current |
| The membrane switch of strengthening of a steering: |
| Upon rotation of the steering wheel | The switch closes the circuit |
| The steering wheel is fixed | The switch opens the circuit |
| The resistance of the coolant temperature sensor: |
| When the coolant temperature is 20 ?� C. | 2.1 - 2.9 kW |
| - At 50 ?� C | 0.68 - 1.0 kW |
| - At 80 ?� C | 0.30 - 0.33 kW |
| Fixing bolts of the throttle body: |
| - Stage 1 | 10 |
| - Stage 2 | 20 |
| Fixing bolts of a fuel collector: |
| - Stage 1 | 10 |
| - Stage 2 | 24 |
Bolt gauge of detonation combustion of fuel - models with engine capacity of 2.0 liters | 24 |
| Nuts and bolts intake manifold | 20 |
| Nuts and bolts of the exhaust manifold: |
| - Models with the engine capacity of 1.6 liters | 21 |
| - Models with the engine capacity of 2.0 liters | 43 |
| Brackets exhaust system: |
| Nuts of fastening of a reception pipe to the exhaust manifold: |
| - Models with the engine capacity of 1.6 liters | 32 |
| - Model "Phase I" (produced before June 1993) with an engine capacity of 2.0 liters | 45 |
| - Model "Phase II" (manufactured after June 1993) with an engine capacity of 2.0 liters | 65 |
| Fixing screw receiving tube | 23 |
| Nuts of fastening of a reception pipe to an intermediate pipe / catalytic converter | 49 |
| Catalytic converter bolts to the tailpipe | 49 |
| Bolts intermediate pipe to the tailpipe | 49 |
All figures are approximate resistance. Before you consider any element out of service, consult with experts.