 printable version
The generator removal and installation
1. Disconnect the battery from weight. Lift the front of the vehicle. 2. Mark and disconnect the wires from the generator Remove the belt. 3. Remove the adjusting screw and bolt. 4. Remove the generator from the bottom. 5. Installation is performed in reverse order.
| 16.2 Parts of the generator (without rear dust cover) 1. Through-Bolt 2. Rear cover brush holder 3. 4. 5. Rectifier front bearing housing 6. Rotor 7. Regulator 8. The stator 9. The rear bearing 10. The front bearing 11. The front cover 12 . Rk
|
| 16.5a Location brush before soldering
|
| 16.5b Places soldering brushes
|
| 16.6 regulator is attached by soldering to the rectifier (A) and the rivet (B)
|
| 
