add to favorites contacts sitemap
REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Nissan Terrano II (from 1985 to 1999 model year)

general info. full specifications. diagnostics. hints. tips. tricks
Nissan Terrano 2
Home
 
Nissan
Terrano 2
Operation and Maintenance
Maintenance Vehicle
The four-cylinder engine
Engines VS
All engines
Systems of cooling, heating, ventilation and air conditioning
Fuel and an exhaust system
The system of electric motor
Emission of exhaust gases
Manual transmission
Automatic Transmission
Coupling the propeller shaft and rear axle
Chassis car with wheel formula 4x4
Technical data
Overview
The device is self-locking hub - removal and installation
Semiaxes - removal and installation
Semi - disassembly and reassembly
Hub and knuckle - crushing and installation
Seals Kit - removal and installation, adjustment of bearings
Front driveshaft - removal and installation
Seals the front gear - Replacement
Front gear -snyatie and installation
Seals transfer case - replacement
Transfer case - removal and installation
Transfer case - disassembling
Brakes
Suspension and steering
Body and trims
Electrical system
 


Hit Counter by Digits


print page printable version

The device is self-locking hub - removal and installation



1. Remove the wheel
2. Remove 6 bolts
3. Carefully remove the hub body, ring, spring and leash A (locking ring, photo).
4. Remove the retaining ring, the washer and the lead in the (photo).
5. Check the thickness of the blocking rings A and B (see photo). If the thickness is less than normal, replace the two rings.
6. Assemble in the reverse order. Lubricate these parts.




« previos page
Overview
next page »
Semiaxes - removal and installation

Copyright © 2010 AutoManuals.biz. Trademarks belong to their respective owners. All rights reserved.