REPAIR MAINTENANCE OPERATION OF MOTOR VEHICLES
Volkswagen Golf II, Jetta (from 1983 to 1992, the year of issue)

general info. full specifications. diagnostics. hints. tips. tricks

Home

Volkswagen
	Golf 2 / Jetta
		General Information
		Engine
		The power supply system
			The power supply system of carburettor engines
			The power supply system of engines with fuel injection
				Replacing the air filter element
				Frequency of idling and the maintenance of carbon monoxide in the exhaust gas
				Check valve cold start and thermal switch
				Checking the air valve cold start
				Check valve engine has warmed up
				Check and replacement of atomizers
				Plate air flow meter
				Fuel distributor
				Airflow Meter
				Pressure regulator
				The booster fuel pump
				Fuel pump
				Fuel filter
				Fuel Battery
				Fuel tank
				Adjusting accelerator cable
			The power supply system of diesel engines
		Coupling
		Transmission
		Transmission
		Front-wheel Drive
		A steering
		Suspension
		Brakes
		Body
		Electrical

printable version

Pressure regulator

Disassembly and assembly

PERFORMANCE ORDER

1. Relieve the pressure in the fuel lines (see. P. 4 sub-section 3.2.6).

2. Remove the stopper controller 10 (see. Fig. Elements of the injection system Jetronic-K) pressure. Remove the cork gasket.

3. Remove the shims 11, O-ring, piston and O-ring again. Replace sealing rings. Shims are not changed. Assemble the regulator in reverse order. Tighten the regulator cap to 25 N ?� m (2.5 kgf ?� m).

« previos page
Airflow Meter

next page »
The booster fuel pump