1. With the ignition off, remove the wire of weight from the battery. |
2. Remove the front buffer. |
3. Drain the coolant from the cooling system. |
4. Disconnect the pipes from the radiator cooling system. |
5. Disconnect the electrical connectors from the sensor and the radiator fan. |
6. Unscrew the bolts (1) securing the front frame on both sides of the car. |
7. Loosen, but do not completely unscrew the screws (2) located above the headlights. |
8. Turn in the service position the upper front cross member. |
Cars with air conditioning |
9. Do not cooling circuit disconnects the air conditioning system. |
10. Remove the screws that secure the condenser to the front frame. Without disconnecting from the condenser pipes, move it to the side and secure in this position. |
All cars |
11. Remove the four screws on the heat sink and remove the heat sink to the bottom of the engine compartment. |