printable version
Coolant temperature
Location coolant temperature sensor: on SOHC engine sensor installed in the discharge pipe of the coolant, the left side of the cylinder head; on engines PB, PF and 2E sensor is mounted on a connection; RP engines on the reverse side of the connecting pipe;
| Fig. 4.7. Coolant pump motor DOHC: 1 - a bolt; 2 - an arm of the generator; 3 - a pulley; 4 - a bolt; 5 - the coolant pump; 6 - a sealing ring; 7 - the upper radiator hose; 8 - the connector; 9 - a hose from the heater; 10 - a hose to the heater; 11 - a hose to the expansion tank; 12 - coolant temperature sensor; 13 - a sealing ring; 14 - trumpet; 15 - oil heat exchanger; 16 - the lower radiator hose; 17 - a lining; 18 - Thermostat
|
DOHC engines on the sensor is installed in the exhaust pipe (see. Fig. 4.7) on the rear surface of the cylinder head; on all models of sensor electrical connector black. Removing and installing coolant temperature sensor in the following order: - Partially drain the coolant from the cooling system; disconnect the wire from the negative terminal of the battery; - Remove the electric plug; - Remove the locking clip and remove the coolant temperature sensor out of the socket; - Remove the nozzle O-ring; - When assembling the new O-ring set. Installation Removal of elements made in sequence, return to removal.
|