 printable version
Replacement technology plugs
Removal and installation of technology plugs in the following order: - Drain the cooling system; - Measure the depth of the installation process plugs; - Drill a hole in the cap and screw the technological self-tapping screws; - Pliers pull the plug technology for the screw head; - Clean the surface of the cylinder block plug socket, then lubricate the hole with sealant;
A WARNING Use sealant for the cooling system. |
- Through a special tube mandrel install new technology plug in the cylinder block to a pre-metered depth; - Pour coolant in the cooling system.
| 
