 printable version
Air nozzles
Through all of the nozzle is fed into the heated or unheated room (depending on the position of the handle A) air. The distribution of the air nozzles determined by the position of the handle C. Extras can be individually opened or closed nozzle 3 and 4.
Nozzle closed: dial on the side  . The nozzle is open: dial on the side  .
Depending on the position of the dial changes the air flow direction adjustment. If the dial rotate under the grate deflector changes the direction of air flow in the horizontal plane. Through the nozzles 2 saved nezapotevshey lower part of the windshield.
How to clean the ice windshield and side windows
The switch set to stage 3. A knob is turned clockwise until it stops. Handle With on  . The nozzles 4 positioned in such a way that the air flow is directed to the side of the glass.
How to prevent fogging of the windscreen and side windows
If the humidity is high, for example, in the rain, the windows fog up, it is recommended to do the following: The switch put on stage 2 or 3. A knob, if desired, converted into a preheating zone of air. Handle with put on . Through nozzles 4 can send an additional warm air to the side windows.
Ventilation (fresh air supply to the salon)
When the following position of the control of the nozzles 3 and 4 are served unheated fresh air: The supply switch to the desired level. A handle to rotate counter-clockwise until it stops. Handle With on .
When fogged windshield put a handle on C .
At the request of the handle C can also be assigned to another position. The nozzles 3 and 4 open.
How to quickly raise the temperature in the cabin
The switch put on stage 3. A knob is turned clockwise until it stops. Handle with put on .
When fogged windscreen to put pen to C .
Nozzles 4 set as desired.
How to maintain a pleasant warmth in the cabin
Once cleansed windows from fogging and the cabin temperature has reached the desired level, it is recommended to do the following: The supply switch to the desired level. A knob to set the desired heating. Handle with set in the area between "Air flow in the footwell" and "Cleaning the ice windscreen and side windows."
When fogged windshield mounted on the handle With .
Nozzles 4 set as desired.
How to set the normal cooling
The supply switch to the desired level. A handle to the desired supply air temperature (heating is also possible). Pen with put in the desired position. In this position, the handle should be at least one nozzle in the dashboard to stay open another refrigeration unit can be ice. Press the D key to include climate control. The nozzles 3 and 4 are set as desired.
How to set the maximum cooling air
The switch put on stage 4. A handle to rotate counter-clockwise until it stops. Handle with mounted on .
In such a situation should handle with at least one nozzle in the dashboard remain open, otherwise the refrigeration unit can be ice. When fogged windscreen to put pen to C .
In this position, handle with recirculation mode is not possible. All windows and lifting sliding roof closed. Press the button to set E recirculated air.
A warning  Recirculated air should, however, be enabled only for a short time, since in this mode the fresh air does not enter the interior.
Press the D key to include climate control. The nozzles 3 and 4 open. At least one nozzle should always be open, otherwise the refrigeration unit can be ice.
Cost-effective operation of the air conditioning system
When operating the installation in the air cooling operation, the drive its compressor is driven by the engine and therefore the use of character setting affects the fuel consumption. For the duration of the work of the air conditioner as much as possible to reduce the need to consider the following recommendations. If the interior of the car is hot standing under the influence of solar radiation, it is recommended to briefly open the windows or doors to ventilate the interior. If during the movement opened a window or the sunroof should not include climate control. When the desired temperature in the cabin can be achieved without the inclusion of the air conditioner is better to use the cabin ventilation system.
General information
At high temperature and high humidity outdoor air may condensate dripping from the evaporator and the formation of puddles under the car. This is normal and is not an indication of leakage of the system. At any intermediate position can be set only handles A and C. To avoid misting, it should be at a low vehicle speed constantly turn the handle in the lower level of the operating mode of the fan and put the handle with position .
If the climate control for a long time is not included, it is possible with the inclusion odor due to the accumulation of deposits on various kinds of evaporation. To avoid odor should include climate control - also during the cold season - at least once a month with the highest level of the fan. At the same time open for a short time one of the windows. The heating capacity of the heating system depends on the temperature of the coolant of the engine - so the greatest heating occurs when at operating temperature engine. In order to heating, ventilation and air conditioning system to work reliably, you need an opening for fresh air intake, located in front of the windshield, keep clean from ice, snow and leaves. The used air leaves through outlets in the rear; These openings must not be partition off. By Car sedan can not override anything the gap between the luggage rack and the rear window, which is used to remove the air.
Disturbances in the air conditioning system
If there is a failure of the air conditioning system, it may be due to the following reasons: - Outdoor temperature below about 5 ?� C;
- Blown fuse. You should check the fuse and replace it if necessary. If the cause of failure is not blown fuse, air conditioning, switch off and refer to specialists;
- Air conditioning system is temporarily disabled due to too high coolant temperature. If you reduce the cooling capacity of the installation, you must turn off the unit and refer to specialists.
| 
